Ultra-Fast 2D Harmonograph Simulator
Oscillator 1 (X-Axis)
Frequency:
1.0
Phase Rate:
0.05
Waveform Mix (Sine to Square):
0.00
Frequency Modulation Rate 1 (Hz):
0.1
Frequency Modulation Depth 1:
0.5
Phase Modulation Rate 1 (Hz):
0.02
Phase Modulation Depth 1:
0.5
Oscillator 2 (Y-Axis)
Frequency:
1.0
Phase Rate:
0.05
Waveform Mix (Sine to Square):
0.00
Frequency Modulation Rate 2 (Hz):
0.1
Frequency Modulation Depth 2:
0.5
Phase Modulation Rate 2 (Hz):
0.02
Phase Modulation Depth 2:
0.5
Envelope
Envelope (Amplitude):
1.00
Rotation
Global Rotation Speed (radians/sec):
1.0
Vertical Overlay Rotation Direction:
Clockwise
Counterclockwise
Horizontal Overlay Rotation Direction:
Clockwise
Counterclockwise
Vertical Overlay Rotation Speed (radians/sec):
0.0
Horizontal Overlay Rotation Speed (radians/sec):
0.0
Vertical Overlay Lines
Manual Line Thickness:
1.0
Line Amount:
100
Bezier Control Point 1 X Offset:
0
Controls the horizontal offset of the first control point for vertical overlay lines. Increasing the absolute value makes the curve more extreme.
Bezier Control Point 2 X Offset:
0
Controls the horizontal offset of the second control point for vertical overlay lines. Increasing the absolute value makes the curve more extreme.
Min Thickness:
0.0
Max Thickness:
10.0
Automation Rate (cycles/sec):
0.00
Horizontal Overlay Lines
Manual Line Thickness:
1.0
Line Amount:
100
Bezier Control Point 1 Y Offset:
0
Controls the vertical offset of the first control point for horizontal overlay lines. Increasing the absolute value makes the curve more extreme.
Bezier Control Point 2 Y Offset:
0
Controls the vertical offset of the second control point for horizontal overlay lines. Increasing the absolute value makes the curve more extreme.
Min Thickness:
0.0
Max Thickness:
10.0
Automation Rate (cycles/sec):
0.00
Harmonograph Settings
Line Width:
1.0
Simulation Speed (cycles/sec):
30.0
Symmetry (Number of Copies):
6
Dot Size Multiplier:
2.0
Sets the size of the tracking dot relative to the line width. Must be between 2x and 5x.
Rotation Reversal Settings
Reversal Period (seconds):
10
Reversal Probability:
0.5
Motion Blur (Smearing) Effect
Motion Blur Intensity:
0.05
Controls the intensity of the motion blur effect. Higher values result in longer-lasting trails.
Secondary Global Rotation
Secondary Rotation Speed (radians/sec):
2.0
Secondary Rotation Direction:
Clockwise
Counterclockwise
Secondary Rotation Reversal Settings
Reversal Period (seconds):
15
Reversal Probability:
0.3
Harmonograph Lines Direction Reversal Settings
Reversal Period (seconds):
20
Reversal Probability:
0.4
Enable Automatic Rotation
Start
Stop
Reset
Save as Image